Birch, stave, natural wood, massive wood. (Cherry). 100% Handcrafted *Sound: Cherry gives greater in the upper frequency of this shell. *Volume: Medium loud *Pitch: Every shell we put a label inside with shell Pitch, so You can tune it precisely. *Diameter: 14 Inches *Depth: 3.5-8 *Thickness: 7 mm (Re-Rings 13mm)

An African specie, dark brown to black. Very porous wood offers a focused tone, good attack. 100% Handcrafted Hardness (Janka 0 – 4000): 1630 Tone (Dark – Bright): 6 Grain (Fine – Coarse): 7

A Latin American specie. While not a true rosewood, it exhibits similar qualities, with elevated projection. 100% Handcrafted Hardness (Janka 0 – 4000): 2200 Tone (Dark – Bright): 5 Grain (Fine – Coarse): 5

A Latin American specie, also known as Tigerwood. Hard and heavy with a fine texture and interesting appearance. 100% Handcrafted. Hardness (Janka 0 – 4000): 1850 Tone (Dark – Bright): 6 Grain (Fine – Coarse): 2 *Pitch: Every shell we put a label inside with shell pitch, so you can tune it precisely. *Thickness: 7 mm (Re-Rings 13mm) 

Tropical Exotic Wood. Origin: Mexico Heavy and hard wood, relatively difficult to work manually It shares attributes with the most valuable and coveted woods in the world, its wide variety of colors ranging from dark brown with cream, grayish white, light touches of green and red with wavy grain and closed texture, it is one of the woods with the greatest international demand. . Its production is limited. The heartwood is resistant and protects from rot fungi; wood has a reputation for being resistant to termites

Stave, natural wood, massive wood, An African specie that is a Mahogany look a like with a denser, finer grain for a more luxurious look and finish. . 100% Handcrafted *Diameter: 14 Inches *Depth: 3.5-8 *Thickness: 7 mm (Re-Rings 13mm)

Stave, natural wood, massive wood, 100% Handcrafted A Latin American specie know for it’s purple heartwood. Nice balance of tone and attack. Will darken to a deeper purple color as it ages *Pitch: Every shell we put a label inside with shell pitch, so you can tune it precisely. *Diameter: 14 Inches *Depth: 3.5-8 *Thickness: 7 mm (Re-Rings 13mm)

OLIVE WOOD It is a highly sought after species. It is mainly used in fine crafts, this species is used for fine furniture and marimbas. However, its abundance in the natural state is currently very low. Its use as wood is regulated by the General Law of Sustainable Forest Development

Stave, natural wood, massive wood, Zebrano. 100% Handcrafted *Sound: Very loud and sensitive body. A lot of medium frequencies. *Volume: Medium loud. *Pitch: Every shell we put a label inside with shell pitch, so you can tune it precisely. *Diameter: 14 Inches *Depth: 3.5-8 *Thickness: 7 mm (Re-Rings 13mm)

OUR GIFT ! REMO Coated Drumhead x 1 piece REMO Snare Side Drumhead x 1 piece

This edge produces a full-bodied sound and allows more contact area with the shell which allows maximum transfer of energy through the shell. This creates a more controlled focused sound with more emphasis on the sound of of the shell. Typically requested for kick drum batter and reso edges, but is gaining popularity for use on snare batter edges.

A 30 degree edge combined with a 30 degree counter cut (outer edge) is similar to our 45/45 edge. However, the shallower apex provides slightly more control over sustain and over-ring.

The 30 degree edge with a round over is the classic edge used on most vintage American drums. This edge gives you a punchy attack, with controlled head tone and resonance.

A 45 degree edge combined with a 45 degree counter cut (outer edge) allows more resonance and adds over-ring with an emphasis on head tone. Precision cut sharp edge, then slightly flattened and hand eased at the apex. A very popular edge.

A 45 degree edge with a roundover creates a classic sound with a nice balance of shell resonance and head tone. Outer rounded edges available from 1/8” to 3/8” in 1/16” increments. The standard recommended edge is 3/16” for snare and tom shells, and 1/4” on Kick shells.

Oil is first applied to enhance the grain, then sealed and sanded smooth with the final applications of catalyzed lacquer in your choice of a low sheen Satin or Gloss finishes. Interiors are sealed and waxed smooth. Allow an extra four weeks for application and curing time.

A rich looking low gloss finish that allows the texture of the grain to be seen and felt, yet silky smooth to the touch. Three applications inside, six applications outside, with progressively finer sanding between applications. Allow two extra weeks for application and curing time.

If you want a durable, high gloss that rivals the most expensive top of the line drum kits, this is your choice. This extremely durable, scuff resistant two part polyester finish is wet sanded and buffed to a deep, mirror like, high gloss. Interiors are sealed and waxed smooth. Allow an additional 8 weeks for application, cure, wet sand and buffing time.